IT Knowledge Base

Technical Repository

HowTo: Cisco Switching – How to create an Etherchannel LACP Port Group

Configure the Ether-channel Load Balancing Method. EtherChannel load balancing can use MAC dresses, IP addresses, or Layer 4 port numbers with a Policy Feature Card 2 (PFC2) and either source mode, destination mode, or both. The mode you select applies to all EtherChannels that you configure on the switch. Use the option that provides the […]

Read More


HowTo: Configure EMC VNXe High Availability for NFS

EMC VNXe Failsafe Networking Overview All ports on the VNXe system are configured automatically with FSN. To use FSN, you have to make sure both storage processors are cabled in the same way. There is a primary port on one storage processor and the secondary port is on the other storage processor. If the primary […]

Read More